 |
| Quantity: | |
|---|---|
 | Product Introduction |
The simple glue mixer is a cost-effective glue preparation equipment specially designed for small and medium-sized plywood factories, wood processing workshops and small-batch production scenarios. Featuring "easy operation, simplified structure and flexible adaptability", it can quickly achieve uniform mixing of components such as adhesives, curing agents and fillers without complex installation or professional operation and maintenance, providing stable and reliable glue support for veneer bonding.
| Product Display |
| Product Process |
Focus on "intuitive inspection + simple debugging" to complete preparation quickly:
Formula and Raw Material Confirmation: Prepare various raw materials according to plywood production requirements, manually weigh and pack them in proportion, and ensure the raw materials are in good condition.
Simple Equipment Inspection: Clean residues in the tank, test the operation status of the mixing paddle, check the tightness of the discharge valve, and ensure the equipment is in normal condition.
Scenario Adaptation and Adjustment: Adjust the mixing speed according to the glue viscosity; preheat the tank wall in low-temperature environments to improve efficiency.
Manual batch feeding eliminates the need for automated systems, suitable for small-batch production:
Main Material Feeding First: Manually pour the weighed adhesive main material directly into the mixing tank to avoid spillage.
Auxiliary Agent Addition with Synchronous Mixing: Start mixing, and slowly add auxiliary agents after the main material forms a vortex; mix at medium speed until the auxiliary agents are fully integrated.
Gradual Filler Addition: Add fillers in multiple batches, and feed the next batch only after the previous one is wrapped by the glue; clean residues at the feed port with a scraper.
Manually adjust the speed and observe the state with naked eyes to ensure uniform glue:
Preliminary Mixing: Mix at medium speed to form a mixed system, and observe the tank bottom to prevent filler sedimentation.
High-Speed Homogenization: Switch to high-speed gear to shear and disperse agglomerates; sample and observe until the glue is fine and free of lumps.
Standing Curing (Optional): Glue with high requirements can be naturally cured by standing, using ambient temperature.
Manual material receiving and quantity control, flexibly matching the production rhythm of small workshops:
Discharging Preparation: Place a material receiving bucket under the discharge port; connect and fix the glue delivery pipe when connecting to a gluing machine.
Manual Quantity-Controlled Discharging: Adjust the valve to control the glue discharge speed; mix at low speed during discharging to prevent sedimentation.
Batch Finishing: Close the valve as needed, and clean the residual glue by mixing at low speed and tapping the tank wall.
Immediate manual cleaning with simple procedures, lowering maintenance thresholds:
Immediate Scraping of Residues: Use a scraper to clean residues in the tank and on the mixing paddle after discharging; recover unspoiled glue if possible.
Simple Rinsing and Drying: Add water and mix to rinse the tank interior; use a small amount of neutral detergent for stubborn residues; dry the tank after rinsing to prevent rust.
Equipment Reset: Close the feed port, cut off the power supply, clean and reset tools, and keep the work area tidy.
