 |
| Quantity: | |
|---|---|
 | Product Introduction |
The plywood gluing machine is a core coating equipment specially designed for modern plywood production lines. With "precision glue control, high efficiency and energy saving, and stable reliability" as its core design concepts, it is highly compatible with various veneer materials such as poplar, eucalyptus and pine.
Through an integrated intelligent control system, it realizes full-process precise control of glue coating, providing key support for the firm bonding between plywood layers and the improvement of production efficiency. Adopting an industrial-grade heavy-duty structure design, the core components are carefully selected from well-known international brands.
After rigorous environmental testing and load verification, it can seamlessly connect with the front and rear processes such as glue mixers and pre-presses. It is an ideal equipment for medium and large panel enterprises to achieve high-quality and large-scale production.
| Product Display |
| Product Parameter |
| Parameter Category | Specific Parameter Description |
Rubber Roller Configuration | Quantity: 2 pieces; Length: 1400mm; Diameter: Φ245mm |
Steel Roller Configuration | Quantity: 2 pieces; Length: 1400mm; Diameter: Φ219mm; Surface Treatment: Chrome Plated |
| Total Machine Power | 3KW |
| Product Advantages |
High-Efficiency and Energy-Saving Pressing PerformanceEquipped with a zoned temperature-controlled heating system and servo hydraulic drive technology, it can precisely match the hot-pressing curves of plywood with different thicknesses, shortening the pressing cycle by 15%-20% compared with traditional equipment. Meanwhile, the waste heat recovery device is installed, which increases the heat energy utilization rate to over 85% and reduces the energy consumption per unit product by about 12%, making it suitable for the continuous and efficient operation needs of large-scale production lines.
Stable and Consistent Product Quality ControlWith high-precision pressure sensors and multi-point temperature monitoring modules, the temperature difference of the hot press plate is controlled within ±2℃, and the pressure fluctuation accuracy is ≤0.5MPa, ensuring the uniformity of the bonding strength between plywood layers (in line with GB/T 9846 standards). Supplemented by an automatic leveling mechanism, it effectively avoids defects such as veneer misalignment and panel warping, and the finished product qualification rate is stably maintained above 99%.
Low-Consumption and Durable Full-Life Cycle Cost AdvantageThe hot press plate is made of chromium-molybdenum alloy treated by vacuum quenching, with a surface hardness of HRC58, 3 times higher wear resistance, and a service life of over 80,000 pressing cycles. The equipment structure adopts a heavy-duty frame design, and combined with an intelligent fault early warning system, the annual maintenance frequency is reduced by 40%, and the full-life cycle operation and maintenance cost is reduced by about 20%, helping enterprises achieve long-term cost reduction and efficiency improvement.
